This web site requires Java Script.
You must enable Java Script on
your browser to navigate this site.
12-Chn Analog Input 4-Chn Analog Output
12 differential analog input channels with a ±10V common mode range and protection to ±40V.
4 analog output channels that span -10.00 to +10.00 volts using 0.01-volt output resolutions.
Electrically isolated from the power supply rails, the communications bus, and the RS-232 / USB port.
Inputs can read voltages from pressure transducers, load cells, strain gauges, temperature sensors, 4-20 mA devices, potentiometer positions, etc.
Inputs incorporate 3 factory calibrated modes: +10.000 V to -8.000 V, ±600.0 mV, and ±600.00 mV.
Inputs incorporate 2 user programmable modes which display readings in direct engineering units of choice.
Inputs incorporate user programmable gain, offset, and decimal point position.
Inputs use a 20-bit A/D converter which provides resolutions down to 1.4 µV (user programmable modes).
Outputs incorporate automatic generation of trapezoidal and S-curve slope profiles.
Outputs incorporate user adjustable ramp-rate and S-curve magnitude.
Outputs incorporate individually selectable power-up / reset voltages for each output channel.
Outputs include hook-up connections for a RESET switch.
Software calibrated; no trim-pots to adjust.
All user configuration and calibration data stored in non-volatile memory.
Wide power supply range (10 to 30 VDC).
The WTX4 is a Data Acquisition and Control module which is available in various different versions that provide a wide assortment of input and output combinations. Multiple units can also be plugged together to create an expandable network. Each WTX4 unit is comprised of four individual sub units which can be a mix of Digital Inputs, Digital Outputs, Analog Inputs, Analog Outputs, and Thermocouple Inputs.